Duratop 460 SL

Duratop 460 SL is a multi-component, single layer, seamless, self-levelling polyurethane mortar for the protection of predominantly dry floors subject to high levels of traffic, impact and abrasion.

 

Product uses

Duratop 460 SL is used as the flooring material of choice. It is the most suitable material for flooring around high heat sources, in chemical spill areas, wash areas and offloading areas, providing moisture resistance, abrasion resistance, impact resistance and ease of cleaning.

 

Advantages

  • Expert application- Installed only by trained and approved specialist contractors.
  • Fast application/rapid access- Can be applied to 7-day old concrete, good quality concrete with high moisture contents or 2 day old polymer screeds.
  • Short curing time and 12 hour access to foot traffic; 24 hours for vehicles.
  • Hygienic/Safe- Slip resistant, non-tainting, non-dusting, monolithic (minimum joints), easy to maintain, microbiologically inert.

 

Coverage

As porosity and texture of concrete floors vary considerably, it is not possible to quote accurate coverage rates, but the following will provide a guide:

Theoretical requirement for 4mm film thickness:        8 kg per m2

Theoretical requirement for 6mm film thickness:        12 kg per m2

 

Available Sizes

20.28kg

 

Finish

 

While Optima Coatings makes every effort to ensure that paint colours match those shown on this website, variations will occur due to different computer screens. Please ask your Optima Coatings Technical Sales Consultant for more accurate colour swatches. To ensure consistency of sheen and colour, always check that paint containers carry the same batch number.